MIG and MAG welding machines
Three phase, 300 to 500 A, at 100% duty cycle. Synergy Services Corporation supplies ESAB MIG and MAG welding machines to steel plants, ferroalloy producers, shipyards and fabricators across India as an authorized ESAB dealer, with the manufacturer’s warranty intact and matched wire feeders. We respond to any enquiry within 24 to 48 hours.
Models we supply.
The columns that decide a purchase order. Full datasheets are published on esab.com.
| Model | Output | Duty cycle | Phase / input | Process |
|---|---|---|---|---|
| MIG 302i | 300 A | 100% @ 300 A | 3 Φ, 415 V | GMAW |
| MIG 402i | 400 A | 100% @ 400 A | 3 Φ, 415 V | GMAW |
| MIG 502i | 500 A | 100% @ 500 A | 3 Φ, 415 V | GMAW |
| MIG 400i CC/CV | 400 A | 60% @ 400 A | 3 Φ, 415 V ±15% | GMAW, MMA |
| Fabricator EM 500i | 500 A | 60% @ 500 A | 3 Φ, 380/440 V | GMAW, MMA |
| Auto K 600 | 600 A | – | 3 Φ | MIG/MAG, thyristor |
Where one machine has to cover MIG, TIG and stick, the multi-process range (Warrior Edge 500 CX and DX, Aristo 500ix, Warrior 500i ECHO) carries all three at 500 A, three phase.
Choosing between them.
Duty cycle is the column that matters on a shop floor. A 500 A machine rated 60% stops for four minutes in ten; the 502i at 100% does not.
| If the job is | Choose |
|---|---|
| Continuous production welding, structural sections, 8 to 20 mm | MIG 402i or MIG 502i, at 100% duty cycle |
| Lighter or intermittent duty, general fabrication | MIG 302i |
| Maintenance where the same set must run MIG and stick | MIG 400i CC/CV or Fabricator EM 500i |
| One machine to cover MIG, TIG and stick | Warrior Edge 500 CX, or Aristo 500ix |
| Heavy, continuous, rugged: thyristor rather than inverter | Auto K 600 |
If you are unsure, send the material and the thickest section you weld.
If this is going through a tender.
| Requirement | Position |
|---|---|
| Local content | Class I local supplier, under the Public Procurement (Preference to Make in India) Order |
| Where ESAB makes these machines | Ambattur and Irungattukottai, Tamil Nadu, and Kalmeshwar, Nagpur |
| Authorization letter, where a purchase requires it | To the buying entity, on request |
| Annual rate contract | Quoted line by line, rate held for the contract period |
Where a tender names an approved make or says “or equivalent”, we quote the ESAB model that meets the written specification and set out where it complies, clause by clause.
What wears, and what fits.
Contact tips, liners, shrouds, nozzles and drive rolls are ordered against the machine. If we supplied it, send the order reference and we will match them without a fresh specification.
Questions.
What do you need from me to quote?
The material, the thickest section you weld, the process and the duty. If you already know the model, that alone is enough.
Are these machines held in stock?
No. We carry sample quantities and order against your requirement.
Do you qualify as a Class I local supplier?
Yes. Synergy Services Corporation quotes as a Class I local supplier under the Public Procurement (Preference to Make in India) Order. ESAB manufactures this equipment in India at Ambattur and Irungattukottai in Tamil Nadu and at Kalmeshwar, Nagpur.
Our tender says “ESAB or equivalent”. Can you quote?
Yes. We quote the ESAB model that meets the written specification and set out where it complies, clause by clause, so the evaluating officer is not left to judge equivalence.
How quickly do you respond to an enquiry?
We respond to any enquiry within 24 to 48 hours.
Next to this.
All welding
TIG, stick, plasma, consumables, torches and safety.
←Quote this
Material, plate thickness, process and duty. Those four are enough to size a machine.
→